For 16inch 3000W motor kits, it could be used for Electric Scooter, which could be 72V 80KPH.
e.g. Electric Motorcycle
Weight, approx 150kg+80kg
Speed: peak 80km/h
Climbing slope: 15 degree@180kg
One set including below kits
1. 1pcs X QSMOTOR 16x3.5inch 3000W V1.12 electric wheel hub motor
2. 1pcs X EM72150SP sine wave motor controller with standard CAN-BUS
3. 1pcs X DKD LCD speedometer with CAN (disable CAN as default)
4. 1pcs X Z6 throttle with combination switch
1). Simplify to make a electric-scooter. Gearbox, transmission shaft, clutch are no need. Which save space.
2). It could be installed in the rear to save more space for battery.
3). Support regenerative braking
4). High efficiency: 85~92%
1. QSMOTOR 16X3.5inch 3000W V1.12 Electric Scooter Hub Motor
Motor Type: BLDC Outer Rotor In-Wheel Hub Motor With Hall Sensor
Brand: QS Motor, QSMOTOR
Motor Design: Double axle with 16inch moped rim (integrated)
Rim Size:16x3.5inch(Narrow Tire as default), matched tire: 120/70-16 etc
Magnet Height: 40mm, 24 pole pairs
Stator: Steel Core
Rated Power: 3000W
Speed: 30KPH-100KPH, it's customized, genearlly we will design as 72V80KPH.
Work Voltage Range: 48V-96V, it will be 72V as default.
Max Torque approx >177.2N.m
Thermic Probe: KTY83-122 (as default, optional)
Max Efficiency approx 88%
Brake type: Disc brake (as default), PCD3*80mm-M8, CB 58mm
Dual Halls with waterproof connectos(One for spare, in case of damage)
10mm² Phase Wire
Waterproof Grade: IP54
Color: Black (As default)
Motor dimension Drawing
Motor Test report
2. EM150SP 72V sinusoidal wave BLDC motor controller, with CAN BUS
3. DKD LCD speedometer, can-bus(optional, LIN as default)
It display D N R, P, S gear, and battery current X5/10.
P.s.: If the working battery doesn't have can-bus communication, then the can-bus speedometer will shows lack of electricity always.
So, we suggest to do the speedometer as Line communication version if client can't get can-bus battery.
4. Z6 throttle with combination switch
With Reverse, Parking button( throttle on/off), 3 slide switch gear, s/boost button, Light and Horn.
It match with VOTOL controller well.
Optional appearance, drawing, performance curve/test report are available.
If you need more technical information, please feel free to contact us.
We will give you reply in 12hours.
EV YOUR LIFE!