utf8 QSMOTOR Front Rear ebike electric bike kit Aluminum Wheel | QS

QSMOTOR Front Rear Aluminum Wheel Rim Assembly for electric bike bicycle conversion kit 3000w

Price:US $183.00/piece
Production Period:15-16 working days
  • QSMOTOR Front Rear ebike electric bike kit Aluminum Wheel
  • 1.60*17inch rear wheel, 1 cross
  • 1.60*18inch rear wheel, 0 cross
  • 1.85*18inch rear wheel, 1 cross
  • 1.6*19inch rear wheel, 1 cross

QSMOTOR Front Rear Aluminum Wheel Rim Assembly for electric bike bicycle conversion kit 3000w


For better customer service, we are able to lace some models for 205 Spoke Hub motor.

The cost of wheel set is for samples, it will be much less for mass production. 

P.s.: For new models (e.g. new hub or 273 hub motor), as one of the key workman is not employed, we're not able to offer the customized service for the moment.

Meanwhile, we could advise the dimension of the motor for calculation, offer the spokes & wheels if need (Not include lacing and truing).


Table of contents

1. Products description(Rim Option, SPEC, Picture, Price)

2. Buying guides

3. Electric conversion kits list

4. QS MOTOR Notice

Products description

1. Rim option list

2. Rim set picture


3. Package

For front & rear wheel, we will new carton package 57*57*25cm for each (no need wooden support now).


Buying Guides

Firstly, To customize a suitable electric hub motor for your vehicle, could you please inform the points in below?
  • 1. E-bike, E-scooter, E-tricycle or E-car? Electric Bike
  • 2. Weight of vehicle with battery, loading weight (weight with load only)? 
  • 3. Tire model/diameter? 
  • 4. Rated voltage and wattage of motor, nominal speed/top speed, and climb angle or torque @ what speed? 
  • 5. Battery nominal voltage, peak voltage, capacity and vehicle range? 
  • 6. What's the drop-outs/rear fork width of your frame?
Within your details information, we could make assessment and calculation accordingly for your project.

If you're interested in our products, please leave your message.

Our salesman will send their replies to you via email in 24hours.


E-Bike Conversion kits list

Currently, QSMOTOR can supply below conversion kits for QS 3kW 205 50H E-Bike Spoke Hub Motor.

a. Matched controller, such as Kelly sine wave controller, Sabvoton SVMC series controller..

b. Speedometer, such as TFT750c display, Cycle analyse CA3 Display with 150A shunt..

c. Electric hydraulic disc brake system 

d. Throttle, such as thumb throttle, full twist throttle with voltage display and ignition

e. Freewheel, such English single speed freewheel, three speed freewheel..

f. 19*1.6inch 2 Cross Pattern Moped Front Wheel Set

g. 19*1.6inch 1 Cross Pattern Moped Rear Wheel Set(optional)

For more details, you can click following hyperlink.


Application Picture



1. Produce time

For sample, 12-13 business days after receiving payment (for sample).

For mass production, approx 30 business days after receiving payment and confirming spec, depends on MOQ.

2. More service

EV sample is necessary for us to verify the system (if you need battery together), we could install the power train on the e-scooter, there will be extra development cost and test cost,

and we could sent back the sample once done (you could test by yourself, which save quite a lot time).

3. Life Time of QS Motor & Warranty of Sample

The Life Time of motor depends on usage.

For general usage, it's about 3-5 years, and it could be 5-7 years if it work in good condition.

Other QS Motor Products
Customer Service