For 1000W motor kits, it could be used for Electric Scooter, which could be 72V 45KPH.
e.g. Electric Scooter
Weight, approx 90kg+85kg
Climbing Slope: 15 degree@175kg
You can click below picture for Aliexpress purchasing link:
One set including below kits
1. 1pcs X QSMOTOR 12x3.5inch 1500W V1.12 electric wheel hub motor
2. 1pcs X EM50SP sine wave motor controller with standard CAN-BUS
3. 1pcs X DKD LCD speedometer with CAN (disable CAN as default)
4. 1pcs X Z6 throttle with combination switch
1). Simplify to make a electric-scooter. Gearbox, transmission shaft, clutch are no need. Which save space.
2). It could be installed in the rear to save more space for battery.
3). Support regenerative braking
4). High efficiency: 85~92%
1. QSMOTOR 12X3.5inch 1500W 260 V1.12 Electric Scooter Hub Motor
Motor Type: BLDC Outer Rotor In-Wheel Hub Motor With Hall Sensor
Brand: QS Motor, QSMOTOR
Motor Design: Double axle with 12x3.5inch moped rim (Integrated), Optional 12x2.5inch moped rim.
Rim Size:12x3.5inch, matched tire: 130/70-12 etc
Magnet Height: 30mm, 24 pole pairs
Stator: Steel Core
Rated Power: 1500W
Rated speed : 21KPH-75KPH, it's customized, genearlly we will design as 72V65KPH.
Working voltage range: 48V-96V
Max Torque approx 115.0N.m
KV: 6.5/8/10 (optional)
Thermic Probe: KTY83-122 (as default, optional)
Max Efficiency approx 88%
Brake type: Disc brake (as default), PCD3*80mm-M8, CB 58mm;
Dual Halls with waterproof connectos(One for spare, in case of damage)
4mm² Phase Wire
Hall sensor phasing angle: 120 degrees
Waterproof Grade: IP54
Color: Black (As default)
2. Dimension drawing
3. Test report
2. EM50SP 72V sinusoidal wave BLDC motor controller, with CAN BUS
3. DKD LCD speedometer, can-bus(optional, LIN as default)
It display D N R, P, S gear, and battery current X5/10.
P.s.: If the working battery doesn't have can-bus communication, then the can-bus speedometer will shows lack of electricity always.
So, we suggest to do the speedometer as Line communication version if client can't get can-bus battery.
4. Z6 throttle with combination switch
With Reverse, Parking button( throttle on/off), 3 slide switch gear, s/boost button, Light and Horn.
It match with VOTOL controller well.
Optional appearance, drawing, performance curve/test report are available.
If you need more technical information, please feel free to contact us.
We will give you reply in 12hours.
Application for 12x3.5inch 1.5kw In-wheel E-scooter hub motor
EV YOUR LIFE