For 1000W motor kits, it could be used for Electric Scooter, which could be 72V 45KPH.
e.g. Electric Scooter
Weight, approx 90kg+85kg
Speed: peak 45km/h
Climbing slope: 15 degree@175kg
You can click below picture for Aliexpress purchasing link
One set including below kits
1. 1pcs X QSMOTOR 12x2.5inch 1000W V1.12 electric wheel hub motor
2. 1pcs X EM30SP sine wave motor controller with standard CAN-BUS
3. 1pcs X DKD LCD speedometer with CAN (disable CAN as default)
4. 1pcs X Z6 throttle with combination switch
1). Simplify to make a electric-scooter. Gearbox, transmission shaft, clutch are no need. Which save space.
2). It could be installed in the rear to save more space for battery.
3). Support regenerative braking
4). High efficiency: 85~92%
1. QSMOTOR 12X2.5inch 1000W 260 V1.12 Electric Scooter Hub Motor
3. Test report
2. EM30SP 72V sinusoidal wave BLDC motor controller, with CAN BUS
3. DKD LCD speedometer, can-bus(optional, LIN as default)
It display D N R, P, S gear, and battery current X5/10.
P.s.: If the working battery doesn't have can-bus communication, then the can-bus speedometer will shows lack of electricity always.
So, we suggest to do the speedometer as Line communication version if client can't get can-bus battery.
4. Z6 throttle with combination switch
With Reverse, Parking button( throttle on/off), 3 slide switch gear, s/boost button, Light and Horn.
It match with VOTOL controller well.
Optional appearance, drawing, performance curve/test report are available.
If you need more technical information, please feel free to contact us.
We will give you reply in 12hours.
Application for 12x2.5inch 3kw in-wheel e-scooter hub motor