For 16inch E-Motorcycle wheel hub motor kits, it could be used for electric motorcycle.
e.g. Electric Motorcycle
E-motorcycle weight, approx 100kg+75*2kg
Tire diameter: 120/80-16
Speed: 72V 90km/h @ fully charged
Climbing slope: 15 degree @250kg
Battery: 72V30Ah lithium battery
One set including below kits
1. 1pcs X QSMOTOR 16x3.5inch 3000W V1.12 electric wheel hub motor
2. 1pcs X EM72100SP sine wave motor controller with standard CAN-BUS
3. 1pcs X Z6 throttle with combination switch
1). Simplify to make a electric-scooter. Gearbox, transmission shaft, clutch are no need. Which save space.
2). It could be installed in the rear to save more space for battery.
3). Support regenerative braking
4). High efficiency: 85~92%
1. QSMOTOR 16X3.5inch 3000W V1.12 Electric Scooter Hub Motor
Motor Type: BLDC Outer Rotor In-Wheel Hub Motor With Hall Sensor
Brand: QS Motor, QSMOTOR
Motor Design: Double axle with 16inch moped rim (integrated)
Rim Size:16x3.5inch(Narrow Tire as default), matched tire: 120/70-16 etc
Magnet Height: 40mm, 24 pole pairs
Stator: Steel Core
Rated Power: 3000W
Speed: 30KPH-100KPH, it's customized, genearlly we will design as 72V80KPH.
Work Voltage Range: 48V-96V, it will be 72V as default.
Max Torque approx >177.2N.m
Thermic Probe: KTY83-122 (as default, optional)
Max Efficiency approx 88%
Brake type: Disc brake (as default), PCD3*80mm-M8, CB 58mm
Dual Halls with waterproof connectos(One for spare, in case of damage)
10mm² Phase Wire
Waterproof Grade: IP54
Color: Black (As default)
Motor dimension Drawing
Motor Test report
2. EM100SP 72V sinusoidal wave BLDC motor controller, with CAN BUS
3. Z6 throttle with combination switch
With Reverse, Parking button( throttle on/off), 3 slide switch gear, s/boost button, Light and Horn.
It match with VOTOL controller well.
Optional appearance, drawing, performance curve/test report are available.
If you need more technical information, please feel free to contact us.
We will give you reply in 12hours.
EV YOUR LIFE!